Ashirwad Carbonics (India) Pvt Ltd

Our precision engineered range of CO2 Generation Plant is available in various capacities and models as per the clients’ specific requirements. These are designed as per client specifications and can store liquids and gases under high pressures. Our quality range of Diesel Base Plant is based on a very sturdy design including cross head and stuffing box, which ensures complete isolation between the combustion chamber and the lubricating oil and thus prevents contamination of the lubricating oil. The Diesel Base Plant offered by us is in high demand all across the globe and is manufactured using quality raw material procured from reliable sources.

Capacity: 25 KG/HR TO 500 KG/HR

Co2 Production Plant Process Description:-

The fuel burned under careful control condition and under PLC Control panel. After water/soda scrubbing in DCC Tower/So2 Removal tower from the flue gas is absorbed in the monoethanolamine based solution in Absorber tower and then again in to the stripper tower which is subsequently heated by the combustion process to release the raw co2 gas. The carbon dioxide is the go the purification train generally known as PTK in which there is two KmNo4 Tower and other one is activated carbon filter if there and then it led to two stage vertical or horizontal compressor and then it goes to the high pressure pre-cooler and then in to the dryer. After through the dryer in an automatic dryer then goes to the liquefaction system generally screw compressor and R 404A is used as a refrigerant and after that pure and liquefied carbon dioxide can then feed to a bulk storage tank.

 

This Continuous process is efficient, reliable and safe and also meets the international food grade quality standards and can be used in soft drinks companies, breweries and many more related sectors.

Our quality range of diesel base plant is based on a very sturdy design including cross head and stuffing box, which ensures complete isolation between the combustion chamber and the lubricating oil and thus prevents contamination of the lubricating oil. The diesel base plant offered by us is in high demand all across the globe and is manufactured using quality raw material procured from reliable sources.


Features:

• Complete stripping of co2
• Improves co2 absorption
• Low pressure purification
• Promotes fuel-savings and cost effective

Co2 Production Plant Process Description:-

The fuel burned under careful control condition and under PLC Control panel. After water/soda scrubbing in DCC Tower/So2 Removal tower from the flue gas is absorbed in the monoethanolamine based solution in Absorber tower and then again in to the stripper tower which is subsequently heated by the combustion process to release the raw co2 gas. The carbon dioxide is the go the purification train generally known as PTK in which there is two KmNo4 Tower and other one is activated carbon filter if there and then it led to two stage vertical or horizontal compressor and then it goes to the high pressure pre-cooler and then in to the dryer. After through the dryer in an automatic dryer then goes to the liquefaction system generally screw compressor and R 404A is used as a refrigerant and after that pure and liquefied carbon dioxide can then feed to a bulk storage tank.

This Continuous process is efficient, reliable and safe and also meets the international food grade quality standards and can be used in soft drinks companies, breweries and many more related sectors.

Natural Gas Based Carbon Di-Oxide Production Plant produces biogas that is utilized as a fuel in gas engine and combined heat and power (CHP) plant. On comparison to the electricity produced from fossil fuels, the electricity produced in the CHP plant is CO₂ neutral. Each plant is assembled for a fully automatic operation and a simplified overall concept. Tested to the fullest extent possible and finish painted, the plant construction is done very carefully. In developing the plant, the selection of suitable raw material is done wisely so that the plant can have long working life with strength and maximum value of money.

Features

• Low operation and maintenance cost
• Long service life
• High production capacity

• Fully automatic operation
• Produces pure carbon dioxide
• Compact in design and layout

 

 

Specifications

 

Components used in the plant

• CO₂ generator
• Amine regenerator
• SO₂ removal tower

• Absorber tower
• Stripper tower
• CO₂ compressor

• CO₂ dryer
• Liquefaction unit
• PLC control panel

Nitrous Oxide Gas Plant Introduction

Safe and economical, the Nitrous Oxide plant from Ashirwad Carbonics (India) Private Limited is a plant with an efficient Generation system which reduces power consumption and adds on to safety. A storage battery assembly for separation of Nitrogen is another safety feature with  our Plants. The gas manufactured conforms to all International (European, American, Indian) standards and is stored in liquid state which can be directly filled into cylinders and can be used for different Industry for Different Purposed.

 

 

 

Nitrous Oxide Plant Process Description

Nitrous Oxide is produced by heating Ammonium Nitrate to a temperature of 250 Deg.c. Ammonium Nitrate is decomposed in the process to give a mixture of Nitrous Oxide & super-heated steam. At the same time impurities are produced including Ammonium Nitrate fumes, Nitrogen & other oxides of Nitrogen. The steam & impurities are removed by scrubbing with water, caustic soda and sulphuric acid in sequence Nitrogen present in traces is removed by bleeding from the top of storage vessels where Nitrous Oxide is stored, after compression by a compressor.

It is produced by heating Ammonium Nitrate to a temperature of approximately 250 C. Heating could be either electrically or by gas. It is then purified in a series of towers before collecting in a gas holder. Gas is then Compressed by a water lubricated compressor, dried and liquefied. Liquid Nitrous oxide is stored in storage vessels where Nitrogen , if present, is removed. Pure liquid Nitrogen oxide is then filled into cylinders by weight.

Ashirwad Carbonics (India) Private Limited Manufactured Nitrous Oxide Consists:-

1.     Gas Holder.

2.     Melter.

3.     Reactor.

4.     Condenser.

5.     Fully automatic/Manual Gas Dryer System.

6.     Gas Compressor.

7.     PLC Based Control Panel.

8.     Chemical Scrubbers.

9.     Cooling Tower.

10.  SS Storage Tank (For Storing Liquids).

Salient Features If Our Nitrous Oxide Plants

• Product purity meets world standards.
• Special safety features incorporated in the plant.
• Stainless Steel Construction.
• Decomposer and Melter separately mounted and controlled.
• Online moisture meter installed
• Complete laboratory equipment for testing of gas is provided with plant as standard accessory.
• Double drier provided.
• Skid mounted; modular design occupies less space.

Bio Mass Based Carbon Di-Oxide Production Plant is wide in demand in different sectors for the production plant. We assemble the plant integrating well developed technology, so that its working life, production and strength can be maximized. These production plants are of vital importance to power generation plants.

Charcoal Fired Based Carbon Di-Oxide Production Plant is developed based on a very sturdy design. The design of the plant includes cross head and stuffing box. This ensures complete isolation between the combustion chamber and lubricating oil. This isolation prevents contamination of the lubricating oil. Supreme quality raw materials are used in engineering the production plant, high in demand all across the globe.

Specifications:

• Type: Co2 Production Plant
• Area: Customised
• Installation: yes
• Capacity: 285 Kg/hr

Features
1)Sturdy design
2)Includes cross head and stuffing box
3)No contamination of the lubricating oil
4)Low operation and maintenance cost
5)Compact to design and layout