Industrial Liquefaction System for Ammonia is used extensively for liquefying industrial gas. Prior to liquefacation, the gas is compressed to two levels using a first and a second compression system. Post compression, the gas is processed in heat exchanger integrated with vertically oriented condensing heat exchange passages and horizontally oriented sensible heat exchange passages.
The system produces high-purity liquefied carbon dioxide gas which can be further used for making dry ice and to produce bubbles in carbonated beverages. In ammonia manufacturing plants, the CO
2 is captured and can be refined to produce liquefied carbon dioxide with 99.995Vol% purity.
Water Chiller
Water Chiller is used to reduce the internal stress in equipment due to heat. We have specially designed chiller for the applications of oil chilling, die mould chilling and chemicals chilling. Attached heavy duty casters make the chiller easy to move from one process to another. Protected in a housing of square pipe frame, the chiller is integrated with CRC power-coated panels and locks. In addition to this, there is a stainless steel storage tank, refrigeration system and hermetically sealed compressor with air conditioner & static type evaporator in the chiller.
Features
- Compact and completely sealed structure
- High efficiency
- Easy installation and maintenance
- Pipe type evaporator and condenser to enhance heat exchange efficiency
Specifications
- Capacity : ranges from 0.5 tonnes to 5.0 tonnes
We welcome your enquiry & try to respond in shortest possible time
Reciprocating and Screw Impeller
Reciprocating and Screw Compressors are the major parts of a refrigeration system. These compressors are used extensively to compress the CO
2 gas upto a desired level for its liquefacation. We offer these compressors in single and two stage models.
Specially designed to produce compressed air with the low dew point, these are quick and easy in installation. All these compressors are developed to reduce cost in operation and power with high capacity.
Features
- Automatic system
- High capacity
- Compress upto a desired level
- Can produce compressed air with low dew point
- Reduced cost
We welcome your enquiry & try to respond in shortest possible time
Condenser
Condenser is a major part of any refrigeration unit. In condensers, the refrigerant discharges the heat, it has absorbed in the evaporator. Heavy duty metal is used in the refrigeration condensers to withstand the heat buildup during the operation. One of the effective solutions for heat transfer from one fluid to another, these are also known as thermal unit, condensing vapor into liquid.
Features
- Horizontal or vertical air discharge
- Heavy gauge steel cabinet
- Internally enhanced tubing with enhanced fin optimizes coil performance
- Motors with internal overload protection
- Maximum cooling surface area
Applications
- Food industry
- Power industry
- Engineering industry
We welcome your enquiry & try to respond in shortest possible time
Heat Exchanger
Heat Exchangers are specifically intended for application in refrigeration systems. It is used to transfer heat between refrigerant vapor leaving the evaporator on the low pressure side of the system and liquid refrigerant leaving the condenser on the high pressure side of the system. The prime objective is to increase the capacity of system refrigeration and prevent possible compressor damage due to left out liquid in vapor stream.
Features
- Optimum heat transfer
- Rust proof
- High efficiency
- Low energy consumption
- Easy to replace
Applications
- Oil & gas industry
- Power plant
- Petroleum industry
- Energy sector
- Food industry
Available as
- Plate heat exchanger
- Tubular heat exchanger
- Coaxial coil heat exchanger
- Finned tube heat exchanger
We welcome your enquiry & try to respond in shortest possible time
